- Written by Charlotte Fedderly
- Posted on 4月 22, 2024
- Updated on 4月 22, 2024
- 1595 Views
On supported devices, a port-channel can be configured as a mirroring destination for both ingress and egress source directions. Traffic mirrored to a port-channel is load-balanced based on the global port-channel load-balance configuration, which is the same for other port-channels.
- Written by Charlotte Fedderly
- Posted on 6月 20, 2022
- Updated on 7月 19, 2024
- 5343 Views
Synchronous Ethernet (SyncE) provides support for frequency synchronization over Ethernet between devices traceable to an external frequency reference, like a primary reference clock, as specified in ITU G.8261.
- Written by Charlotte Fedderly
- Posted on 6月 22, 2021
- Updated on 2月 24, 2022
- 6720 Views
Forwarding destination prediction enables visibility into how a packet is forwarded through the switch and allows
- Written by Charlotte Fedderly
- Posted on 8月 25, 2020
- Updated on 2月 21, 2024
- 8476 Views
This feature adds support for a selected set of configured interfaces to collect egress flow samples. Egress sFlow can be configured on ethernet and port-channel interfaces.
- Written by Charlotte Fedderly
- Posted on 1月 21, 2019
- Updated on 4月 6, 2022
- 5687 Views
This article describes the TAP Aggregation 802.1Q (VLAN) tag stripping feature. This feature allows up to two of the outermost incoming 802.1Q tags to be stripped, and can be configured on a traffic steering policy or a tool port.