- Written by Quentin L'Hours
- Posted on 12月 23, 2019
- Updated on 12月 23, 2019
- 9648 Views
In the multi agent routing protocol model, the Bgp agent now supports matching community lists with a logical OR via
- Written by Sandeep Betha
- Posted on 1月 22, 2021
- Updated on 3月 7, 2025
- 12984 Views
This feature adds support for user-configured BGP Nexthop Resolution RIB profiles for various BGP-based services e.g. IP unicast, L3 VPN, EVPN, etc. The feature allows an administrator to customize the next hop resolution semantics of BGP routes with an ordered list, or profile, of resolution RIB domains (i.e., either tunnel or IP domain). This allows EOS to direct specific services over the specified RIB domains, overriding the default behavior.
- Written by Charles Gibert
- Posted on 6月 13, 2019
- Updated on 6月 13, 2019
- 8417 Views
The “set as path prepend” clause in route map configuration mode has been enhanced with the addition of
- Written by Paraic Gallagher
- Posted on 10月 28, 2020
- Updated on 10月 28, 2020
- 8059 Views
This feature adds a configuration option which provides a CLI error if a reference is made to an unconfigured policy
- Written by Arpit Bansal
- Posted on 8月 18, 2020
- Updated on 8月 18, 2020
- 8302 Views
Level 1 2 routers set attached bit in their Level 1 LSPs to indicate their reachability to the rest of the network. A
- Written by Sharad Birmiwal
- Posted on 2月 3, 2022
- Updated on 2月 3, 2022
- 10187 Views
The "set metric" clause in a route map sequence has been enhanced with the addition of the "igp nexthop cost" keyword.
- Written by Deeksha Srivastava
- Posted on 3月 12, 2020
- Updated on 3月 16, 2020
- 8128 Views
This feature adds support for ‘match interface’ clause under route map config for Bgp policy application in
- Written by Robert Van Dijk
- Posted on 8月 20, 2020
- Updated on 9月 4, 2020
- 7951 Views
This feature adds support for ‘match ip(v6) resolved next hop’ clause under route map config for BGP policy
- Written by David Cronin
- Posted on 8月 26, 2019
- Updated on 10月 25, 2021
- 10426 Views
This document describes a new CLI command to help debug how and why route maps permit and deny paths. The aim of this CLI
- Written by Nikhil Satish Pai
- Posted on 12月 7, 2020
- Updated on 12月 9, 2020
- 8135 Views
This feature adds support for the match ospf instance <instanceID> clause under the route map config.
- Written by James Doherty
- Posted on 10月 28, 2020
- Updated on 10月 28, 2020
- 7504 Views
4.25.0F adds support to use large community lists in the ‘set large community’ route map set clause.