Print

7060X6 Series - Overview Print

Overview

This guide is intended for properly trained service personnel and technicians who need to install selectedArista Networks Data Center Switches.

This section discusses the following topics:

Scope

This guide covers the following devices:

DCS-7060X6-64PE DCS-7060X6-32PE

 

Important:

Only qualified personnel should install, service, or replace this equipment.

 

Seul le personnel qualifié doit installer, service, ou remplacer cet équipement.

 

Receiving and Inspecting the Equipment

Upon receiving the switch, inspect the shipping boxes and record any external damage. Retain packing materials if you suspect that part of the shipment is damaged; the carrier may need to inspect them.

If the boxes were not damaged in transit, unpack them carefully. Ensure you do not discard any accessories packaged in the same box as the main unit.

Inspect the packing list and confirm that you received all listed items. Compare the packing list with your purchase order. The Parts List provides a list of components included with the switch.

Safety Information

Refer to the Arista Networks document Safety Information and Translated Safety Warnings at https://www.arista.com/en/support/product-documentation.

Important:

Class 1 Laser Product: This product has provisions for installing Class 1 laser transceivers, which provide optical coupling to the communication network. After a Class 1 laser product is installed, the equipment is a Class 1 Laser Product. The customer is responsible for selecting and installing the Class 1 laser transceiver and for ensuring that the Class 1 AEL (Allowable Emission Limit) per EN/IEC 60825, CSA E60825-1, and Code of Federal Regulations 21 CFR 1040 is not exceeded after the laser transceiver have been installed. Do not install laser products whose class rating is greater than 1. Refer to all safety instructions that accompany the transceiver before installation. Only Class 1 laser devices, certified for select in the country of installation by the cognizant agency, are to be utilized in this product.

 

Produit Laser de classe 1: Ce produit est prévu pour l'installation d'émetteurs-récepteurs laser de classe 1, qui assurent un couplage optique au réseau de communication. Une fois qu’un produit laser de classe 1 est installé, l’équipement devient un produit laser de classe 1. Le client est responsable de la sélection et de l'installation de l'émetteur-récepteur laser de classe 1 et de s'assurer que la classe 1 AEL (limite d'émission admissible) selon EN/IEC 60825, CSA E60825-1 et Code of Federal Regulators 21 CFR 1040 n'est pas dépassée après l'installation de l'émetteur-récepteur laser de classe 1. un émetteur-récepteur laser a été installé. N'installez pas de produits laser dont la classe est supérieure à 1. Reportez-vous à toutes les instructions de sécurité qui accompagnent l'émetteur-récepteur avant l'installation. Seuls les appareils laser de classe 1, certifiés pour une sélection dans le pays d'installation par l'agence compétente, doivent être utilisés dans ce produit.

 

Important:

This product's ultimate disposal should follow all national laws and regulations.

 

L'élimination finale de ce produit doit respecter toutes les lois et réglementations nationales.

 

Obtaining Technical Assistance

Any customer, partner, reseller, or distributor holding a valid Arista Service Contract can obtain technical support the following ways.

  • Email: 이 이메일 주소가 스팸봇으로부터 보호됩니다. 확인하려면 자바스크립트 활성화가 필요합니다.. This is the easiest way to create a new service request.

    Include a detailed description of the problem and the “show tech-support” output.

     

  • Web: https://www.arista.com/en/support.

    You can create a support case through the support portal on our website. You may also download the most current software and documentation and view FAQs, Knowledge Base articles, Security Advisories, and Field Notices

     

  • Phone: +1 866-476-0000 or +1 408-547-5502.

     

    Important:

    No user serviceable parts inside. Refer all servicing to qualified service personnel.

     

    Aucune pièce réparable par l'utilisateur à l'intérieur. Confiez toute réparation à un technicien qualifié.

     

Specifications

This section lists the specifications of the Arista data center modular switches and components covered by this guide.

Table 1. Switch Specifications (Dimensions and Weights)
Switch Size (W x H x D) Weight
DCS-7060X6-64PE 48.3 x 8.8 x 60.7 cm

(19 x 3.50x 23.9 inches)

 20.9 kg

(46.0 lbs.)
DCS-7060X6-32PE 48.3 x 4.4 x 55.2 cm

(19 x 3.50x 21.7 inches)

 13.2 kg

(29.2 lbs.)

 

Table 2. Switch Specifications (Operational and Storage)
Switch Operating Temperature Storage Temperature Operating Altitude Relative Humidity
All 0° to 40°C

(32° to 104°F)

 -25° to 70°C

(-13° to 158°F)

 0 to 3,000 meters

(0 to 10,000 feet)

 5 to 90%

(non-condensing)

 

Table 3. Switch Specifications (Power Input)
Power Source PSU Models Ratings
Power Input: AC
  PWR-2421 HV 200 to 277 VAC 13.5 A

(at 200 V) 50/60 Hz
  PWR-2011-AC  
Power Input: DC
  PWR-2421 HV 240 to 380 VDC
  PWR-2411-MC -48 to -60 VDC, 60.0 to 50.0 A
  PWR-2411-DC -48 to -60 VDC, 42 A (at -48 V)

 

Note: Use only the PSU models supported by the switch. Some switches described in this guide could use power supplies that may no longer be available. Contact your local Arista representative for more information.

 

Table 4. Switch Specifications (Power Draw)
Switch Power Draw (Typical / Maximum) Supported Power Supply
DCS-7060X6-64PE 640 W / 2218 W PWR-2421 HV

PWR-2411-MC
DCS-7060X6-32PE 348 W / 1136 W PWR-2011-AC

 

..