Print

7060X6 Series - Parts List Print

Parts List

This section lists the installation parts of the switch accessory kit.

Each switch provides an accessory kit containing the parts required to install the switch. A four-post rack mount is recommended for all switches. Use the rack-mount parts included with your switch for mounting. Rails from different kit SKUs may look similar but incompatible with extension kits for longer switches. Depending on the PSU, C13/14, C19/20, or SAF-D type power cables are included in the accessory kit.

 

Note: Use only the components shipped with the switch or compatible replacement parts.

 

This section discusses the following topics:

Accessory Kits

This section describes the components included with the accessory kits available with the switches. Not all kits are shipped with all switches. Use only the parts shipped with the switch or optional, compatible kits. Do not mix parts from incompatible kits such as KIT-7001/2 and KIT-7101/2.

KIT-7101

The kit supports rack depths of twenty-two to thirty-two inches for four-post rack mounting of 1RU switches. It is compatible with the deep chassis adapter required to support heavier and longer switches.

 

Note: KIT-7101 metals are marked with a double triangle symbol to distinguish them from the equivalent KIT-7001 parts.

 

 
Assembly Part Number Description Quantity
  IEC-320/C13-C14, 13 A, 250 V, 2 meter 2
  RJ45 Patch Panel Cable, 2 meter 1
  RJ45 to DB9 Adapter Cable, 2 meter 1
  Identity tag 1
ASY-05581 Rack ear with captive thumb screw 2
ASY-05578 Front rack rail with guide block 2
ASY-00916 Rear sliding rack rail with guide block 2

 

KIT-7101-D

The kit supports rack depths of twenty-two to thirty-two inches for four-post rack mounting of 1RU switches. It includes the deep chassis adapter required to support heavier and longer switches.

 
Assembly Part Number Description Quantity
  IEC-320/C13-C14, 13 A, 250 V, 2 meter 2
  RJ45 Patch Panel Cable, 2 meter 1
  RJ45 to DB9 Adapter Cable, 2 meter 1
  Identity tag 1
ASY-05581 Rack ear with captive thumb screw 2
ASY-05578 Front rack rail with guide block 2
ASY-00916 Rear sliding rack rail with guide block 2
ASY-05576 Deep chassis adapter 2

 

Figure 1. Four-Post 1RU Rack Mounting Brackets with Roller Extensions
 
1 Rack rail 4 Deep chassis adapter 7 Double triangle symbol
2 Rack rail 5 Rack ear with captive thumb screw    
3 Rack ear with captive thumb screw 6 Deep chassis adapter    

 

KIT-7102

The kit supports rack depths of twenty-two to thirty-two inches for four-post rack mounting of 1RU switches. It supports the deep chassis adapter required to support heavier and longer switches.

 
Assembly Part Number Description Quantity
  IEC-320/C19-C20, 16 A, 250 V, 2 meter 2
  RJ45 Patch Panel Cable, 2 meter 1
  RJ45 to DB9 Adapter Cable, 2 meter 1
  Identity tag 1
ASY-05581 Rack ear with captive thumb screw 2
ASY-05578 Front rack rail with guide block 2
ASY-00916 Rear sliding rack rail with guide block 2
  Deep chassis adapter 2

 

KIT-7102-D

The kit supports rack depths of twenty-two to thirty-two inches for four-post rack mounting of 1RU switches. It includes the deep chassis adapter required to support heavier and longer switches.

 
Assembly Part Number Description Quantity
  IEC-320/C19-C20, 16 A, 250 V, 2 meter 2
  RJ45 Patch Panel Cable, 2 meter 1
  RJ45 to DB9 Adapter Cable, 2 meter 1
  Identity tag 1
ASY-05581 Rack ear with captive thumb screw 2
ASY-05578 Front rack rail with guide block 2
ASY-00916 Rear sliding rack rail with guide block 2
ASY-05576 Deep chassis adapter 2

 

KIT-7201

The kit supports rack depths of twenty-two to thirty-two inches for four-post rack mounting of 2RU switches.

Figure 2. Four-Post 2RU Rack Mount Kit Components
 
1 UNC 12-24 screws (pre-assembled) 4 Rear sliding rack rail with guide block 7 Rack ear with captive thumb screw
2 Rack Rail (assembled) 5 Rack Rail (assembled) 8 Thumb screw (detail)
3 Front rack rail with guide block 6 Rack ear with captive thumb screw    

 

 

 
Assembly Part Number Description Quantity
  IEC-320/C13-C14, 13 A, 250 V, 2 meter 2
  RJ45 Patch Panel Cable, 2 meter 1
  RJ45 to DB9 Adapter Cable, 2 meter 1
  Identity tag 1
ASY-06132 Rack ear with captive thumb screw 2
ASY-03765 Front rack rail with guide block 2
ASY-03767 Rear sliding rack rail with guide block 2

 

KIT-7202

The kit supports rack depths of twenty-two to thirty-two inches for four-post rack mounting of 2RU switches.

 
Assembly Part Number Description Quantity
  IEC-320/C19-C20, 16 A, 250 V, 2 meter 2
  RJ45 Patch Panel Cable, 2 meter 1
  RJ45 to DB9 Adapter Cable, 2 meter 1
  Identity tag 1
ASY-06132 Rack ear with captive thumb screw 2
ASY-03765 Front rack rail with guide block 2
ASY-03767 Rear sliding rack rail with guide block 2

 

KIT-7203

The kit supports rack depths of twenty-two to thirty-two inches for four-post rack mounting of 2RU switches.

 
Assembly Part Number Description Quantity
  SAF-D GRID - IEC-320/C20, 16 A, 250 V, 2 meter 2
  RJ45 Patch Panel Cable, 2 meter 1
  RJ45 to DB9 Adapter Cable, 2 meter 1
  Identity tag 1
ASY-06132 Rack ear with captive thumb screw 2
ASY-03765 Front rack rail with guide block 2
ASY-03767 Rear sliding rack rail with guide block 2

 

Cables

Lists the cables required for installation of the switches.

 

Note: Use only the power cables shipped with your switch.

 

 

 
Quantity Description
2 Power cables: IEC-320/C13-C14, 13 A, 250 V, 2 m
2 Power cables: SAF-D GRID - IEC-320/C20, 16 A, 250 V, 2 m
1 RJ-45 Patch Panel Cable, 2 m
1 RJ-45 to DB9 Adapter Cable, 2 m

 

Warning:

All provided power cables are for use only with Arista products.

 


Ground Extender Kit (Optional)

Lists the cables required for the device's installation.
 
SKU Description
KIT-GND-EXT-1RU1 Ground extender kit for NEBS compliance
KIT-GND-EXT-2RU1 Ground extender kit for NEBS compliance
1. Compatible with specific devices.
..