EOS provides support for the use of IPsec to establish and maintain IPsec tunnels.  Currently EOS supports only route based IPsec tunnels - i.e traffic is routed through the tunnel only if there are routes in the FIB pointing to the IPsec tunnel as the next-hop.

Application based routing has previously been restricted to use only the IP header fields to classify a flow into a user defined application.  A deep packet inspection module is now available and extends application identification for traffic destined for the WAN network.

This feature enables MACsec service for non MACsec capable front panel ports. MACsec over front panel port is

This feature enables MacSec service over VxLAN . Macsec over Vxlan is provided by mapping a VNI, Remote VTEP Ip to a

On 7500E, sFlow output interface feature enables sFlow to use the hardware provided output interface and