- Written by Kallol Mandal
- Posted on 12月 12, 2024
- Updated on 12月 12, 2024
- 422 Views
Each ARP/ND packet into a switch may generate an update for the switch ARP/Neighbor table and this update may need to be synchronized with the MLAG peer when VXLAN is configured. Prior to this feature, these updates (on a VXLAN setup) are synchronized by sending an UDP packet (one packet per update) containing the IP/MAC/VLAN information from the MLAG peer where the ARP/ND packet is received to the other MLAG peer.
- Written by Jeff Hornsberger
- Posted on 8月 19, 2020
- Updated on 8月 19, 2020
- 8944 Views
LDP End of LIB is a signaling enhancement defined in RFC 5919 to allow an LDP speaker to notify a neighbor when it has
- Written by Jikai Yin
- Posted on 6月 29, 2016
- Updated on 12月 11, 2023
- 9643 Views
NAT Peer State Synchronization feature provides redundancy and resiliency for Dynamic NAT across a pair of devices in an attempt to mitigate the risk of single NAT device failure. Each switch advertises connection state updates to its peer. State update consists of connection creation, connection state change (TCP mostly) or connection tear down