Tag :: SNMP

This feature adds a CLI knob to allow disabling the ENTITY STATE traps entStateOperEnabled &

The software for Syslog, NTP and SNMP used in EOS resolves hostnames at service start-up. It’s possible that during service operation, the configured host becomes unavailable and the configuration needs to be set to a different host to continue the service. The problem is that such change requires manual restart of the service. Even if the hostname doesn’t change and only the underlying address is updated at the DNS server, the administrator has to manually reset service configuration.

This feature adds a SNMP CLI knob to allow an interface’s speed, as shown in IF MIB, to reflect its shaped bandwidth.

SNMP IP address ACL support provides the ability to add access lists to limit the source addresses that can be used to

Hardware Table Capacity Monitoring is an existing feature to keep track of the capacity and utilization of various

Starting 8.8 release, Cloud customers can receive all events/alerts as SNMP traps. While configuring an SNMP trap

This feature adds RSVP information for three tables from MPLS TE STD MIB:. mplsTunnelTable.

Users wishing to be notified about packet drops or high link saturation in the DMF fabric can receive SNMP traps for these events. Specifically, when trap generation is enabled, the following events will send an SNMP trap to the configured trap collector:

This feature adds three new SNMP traps for MAC move, learn, and age events: aristaMacMove, aristaMacLearn, and