Total 4 results found for the keyword of "wap c460 power the access point on"
Wi-Fi access point C-460 - powering the access point On
powering the access point On power the access point (AP) on by plugging one end of the Ethernet cable into the power over Ethernet++ (PoE++) switch or injector and the other end into the Ethernet/PoE++ ...
Wi-Fi access point C-460 - Connecting the access point to the Network
Connecting the access point to the Network To connect the AP to the network, perform the following steps: Be sure to install the AP on a network with a DHCP-enabled server. Set up a DNS entry ...
Wi-Fi access point C-460 - Installing the access point
Installing the access point This section contains the procedure to install the access point (AP). Zero-Configuration of the access point the AP supports zero-configuration under the following ...
Wi-Fi access point C-460 - access point Overview
access point Overview C-460 is a multi-radio 802.11be access point. Refer to the C-460 datasheet for more information.   Note: This equipment is suitable for use in environment air spaces ...