- Written by Charlotte Fedderly
- Posted on March 3, 2025
- Updated on March 3, 2025
- 284 Views
sFlow independent configuration allows the user to configure the sFlow source and agent addresses independently of one another. This feature fixes the limitations of “sflow source-interface” where the address it uses is indeterminate when the interface has multiple addresses assigned.
- Written by Charlotte Fedderly
- Posted on April 22, 2024
- Updated on April 22, 2024
- 3798 Views
On supported devices, a port-channel can be configured as a mirroring destination for both ingress and egress source directions. Traffic mirrored to a port-channel is load-balanced based on the global port-channel load-balance configuration, which is the same for other port-channels.
- Written by Charlotte Fedderly
- Posted on June 20, 2022
- Updated on July 19, 2024
- 7395 Views
Synchronous Ethernet (SyncE) provides support for frequency synchronization over Ethernet between devices traceable to an external frequency reference, like a primary reference clock, as specified in ITU G.8261.
- Written by Charlotte Fedderly
- Posted on June 22, 2021
- Updated on December 30, 2024
- 8946 Views
Forwarding destination prediction enables visibility into how a packet is forwarded through the switch and allows
- Written by Charlotte Fedderly
- Posted on August 25, 2020
- Updated on March 26, 2025
- 10697 Views
This feature adds support for a selected set of configured interfaces to collect egress flow samples. Egress sFlow can be configured on Ethernet and Port-Channel interfaces, and on subinterfaces on select platforms. Hardware acceleration is not currently supported for egress sFlow and all sample processing is performed in software.
- Written by Charlotte Fedderly
- Posted on January 21, 2019
- Updated on April 6, 2022
- 7616 Views
This article describes the TAP Aggregation 802.1Q (VLAN) tag stripping feature. This feature allows up to two of the outermost incoming 802.1Q tags to be stripped, and can be configured on a traffic steering policy or a tool port.