- Written by Himanshu Singh
- Posted on April 25, 2025
- Updated on April 25, 2025
- 25 Views
Automatic certificate management provides support for retrieving signed x509v3 certificates from a server under the Enrollment over Secure Transport (EST) protocol, described in RFC 7030. The feature provides only EST client capabilities.
- Written by Shourya Agrawal
- Posted on April 25, 2025
- Updated on April 25, 2025
- 25 Views
This feature adds support for using the management port on AWE-7220RP-5TH-2S alternately as Ethernet8 port.
- Written by Gokhan Tanisik
- Posted on April 25, 2025
- Updated on April 25, 2025
- 19 Views
This feature adds the ability for an L3 default gateway TEP in a Centralized Gateway topology to advertise its SVI virtual IP addresses to VARP MAC bindings and primary addresses to System MAC bindings using EVPN type-2 routes for EVPN VXLAN overlays. Two new commands, redistribute router-mac virtual-ip[next-hop vtep primary] and redistribute router-mac system ip are introduced to enable the redistributions. This would help the L2 TEP on the network to learn the default gateway IP without flooding an ARP request for the gateway IP. This feature is only intended for Centralized Gateway Topologies.
- Written by Kumaran Narayanan
- Posted on April 25, 2025
- Updated on April 25, 2025
- 20 Views
This feature enables IPv6 access control list (ACLs) on cloudEOS and Caravan devices, providing access control on incoming traffic (ingress direction). ACLs use packet classification to mark certain packets going through the packet processor pipeline and then take configured action against them. Rules are defined based on various fields of packets.
- Written by Ioana Costea
- Posted on April 25, 2025
- Updated on April 25, 2025
- 16 Views
Introduced in the 4.34.0F release, the maximum links feature allows users to specify the number of active members in both LACP and static port-channels. If active members become inactive due to configuration changes or link failure, previously restricted members can become active. This ensures the port-channel remains operational, preventing disruptions even if all initial active members fail.
- Written by Hongda Huang
- Posted on April 25, 2025
- Updated on April 25, 2025
- 15 Views
The Lowest Load feature uses load as a key metric for selecting the best path. When this metric is prioritized, routers will choose the path with the lowest load as the best option.
- Written by Jialong Chen
- Posted on April 25, 2025
- Updated on April 25, 2025
- 13 Views
This feature allows the VRRP MAC to be advertised via EVPN MAC-only routes when VRRP is configured on the VTEP.
- Written by Saurabh Kumar
- Posted on April 25, 2025
- Updated on April 25, 2025
- 14 Views
Pathfinder deployments have restrictions on what devices can form a DPS tunnel between them. All the devices are categorized as either Site or Zone transit or Region transit.