- Written by Thomas Cannon
- Posted on April 18, 2024
- Updated on April 18, 2024
- 1449 Views
This TOI describes a feature allowing packets that do not match any VLAN translations to be dropped from a port. This can be useful to drop selective Q-in-Q packets that do not receive a VLAN. The Configuration section details CLI commands used to configure the feature.
- Written by Leandro Penz
- Posted on August 21, 2020
- Updated on August 21, 2020
- 6244 Views
Dynamic CLI Access VLAN is a command that sets the effective access VLAN in a port without changing the running
- Written by Christian Geddings
- Posted on August 17, 2023
- Updated on August 17, 2023
- 3076 Views
A DMF fabric is made up of groups of switches, known as islands, that are connected over the data plane. There are no data plane connections between switches in different islands. When Push-Per-Filter forwarding is enabled, monitored traffic is forwarded within an island using the VLAN ID associated with a Filter Interface. These VLAN IDs are configurable. Previously, the only recommended configuration was for these VLAN IDs to be globally unique.
- Written by Harold Fong
- Posted on August 30, 2019
- Updated on September 5, 2019
- 8363 Views
This feature makes the PTP agent aware of VLANs, running with a single Best Master Clock Algorithm (BMCA). It allows
- Written by Aurora Desmarais
- Posted on June 20, 2022
- Updated on July 9, 2024
- 6627 Views
This feature allows traffic ingressing a VLAN to be mirrored. It mirrors based on the VLAN tag in the Ethernet header, so it is not port based.
- Written by Yuyang Chen
- Posted on June 15, 2021
- Updated on June 21, 2021
- 7602 Views
Port wide port security: Port security with address limit on the port configured by the existing shutdown mode port