Cabling the Appliance

For all installations:

1. Plug the 12V power adapter into a power source and connect it to the DC 12V power input on the rear panel.
2. Plug the 54V power adapter into a power source and connect it to the DC 54V power input on the rear panel.
3. Connect an Ethernet cable from your Internet modem or router to Port 1.
4. Connect an Ethernet cable from your network device to Port 2.
5. Power on the system by pressing the power button located on the rear panel next to the power input.
6. Allow approximately two minutes for the system to initialize before continuing with the next steps.