The bottom panel of the O-105E has LAN or PoE connectors that enable you to connect the device to a wired LAN through a switch or a hub. The ports provide power for the device by using the 802.3at standard.
The access point (AP) package must contain the components shown in the following figure.
Figure 1. Package Components
Table 1. Labels: Package Components
Label
Description
1
O-105E Access Point
2
Mounting Bracket
3
4 screws for fixing bracket on the wall
4
4 screws for fixing bracket on the wall
5
2 black sealing pins
6
4 srews for fixing device in the bracket
7
4 screws for earthing
8
2 metal clamps
Important:The MAC address of the device is printed on a label at the bottom of the product and the packaging box. Note down the MAC address, before mounting the device.
If the package is not complete, please contact Arista Networks Technical Support Team at This email address is being protected from spambots. You need JavaScript enabled to view it. or return the package to the vendor or dealer where you purchased the product.