Side Panel of O-105E
The side panel of the O-105E has LEDs that indicate the working of the device.
![](/assets/images/user-manual/wap-o105e/Graphics/O-105E%20Overview/O-105E_side_panel.png)
Label | Description |
---|---|
1 | Power |
2 | 2.4 GHz Radio |
3 | 5 GHz Radio |
4 | LAN2 |
5 | LAN1 (PoE) |
Power LED: The following table describes the Power LED states.
Green | Orange | |
Solid | Running at full capability | Running at reduced capability |
Blinking | Received IP address, but not connected to the server | Did not receive an IP address |
Reduced capability indicates that the AP is getting lower than the required maximum power from the PoE switch, i.e., 802.3af instead of 802.3at.
LAN1 LED: ON when the corresponding interface is up.
LAN2 LED: ON when the corresponding interface is up and either wired guest or link aggregation is configured.
Radio LEDs: ON when the corresponding radio is operational.