TOI Author :: Emil Maric

The intended purpose of this feature is to introduce a server streaming RPC. When a client subscribes to this RPC, they will receive a message anytime there is an update to the hardware programming state of an MPLS route or the Nexthop-Group to which it points to. Note that messages will only be streamed in this RPC callback for versioned MPLS routes that point to versioned nexthop-groups. Messages will not be streamed via this RPC for MPLS routes and Nexthop-Groups that don’t meet this criteria.

In order for forwarding equivalence classes (FECs) to get programmed in the ASIC, they must have some form of a

Routes covered by a resilient equal-cost multi-path (RECMP) prefix are types of routes that make use of hardware tables dedicated for equal-cost multi-path (ECMP) routing. Resilient ECMP deduping is a new feature wherein the switch will reactively attempt to reduce the number of ECMP hardware table entries allocated by forcing routes that share the same set of next hops but point to different hardware table entries to point to the same hardware table entry when hardware resource utilization is high. Forcing RECMP routes to change the hardware table entry that they point to may potentially cause a traffic flow disruption for any existing flows going over that route. The deduping process will attempt to minimize the amount of potential traffic loss caused.

The existing show traffic engineering segment routing policy ... command supports showing the counters per segment

On Algomatch platforms, expansions and encoding transformations on IP prefixes are performed before attempting to