This appendix lists the installation parts contained in the switch accessory kit.
Each switch provides an accessory kit that contains parts that are required to install the switch. Four-post rack mount is recommended for all switches. Use the rack-mount parts included with your switch for mounting. Rails from different kit SKUs may look similar but could be incompatible for use with extension kits for longer switches. Depending on the PSU, C13/14, C19/20 or SAF-D type power cables are included in the accessory kit.
Note: Use only the components shipped with the switch or compatible replacement parts.
This section describes the components included with the accessory kits available with the switches. Not all kits are shipped with all switches. Use only the parts shipped with the switch or optional, compatible kits. Do not mix parts from incompatible kits such as KIT-7001/2 and KIT-7101/2.
KIT-7001
The kit supports rack depths of twenty two to thirty two inches for four-post rack mounting of 1RU switches. The kit includes two-post rack mount parts. If needed, only center mount is recommended for two-post mounting.
Assembly Part Number
Description
Quantity
ASY-00921
Two-post brackets
2
IEC-320/C13-C14, 13 A, 250 V, 2 meter
2
RJ45 Patch Panel Cable, 2 meter
1
RJ45 to DB9 Adapter Cable, 2 meter
1
Identity tag
1
ASY-01098-05
Rack ear with captive thumb screw
2
ASY-00905-0X
Front rack rail with guide block
2
ASY-00916-0X
Rear sliding rack rail with guide block
2
Figure 1. Two-Post Rack Mounting Brackets
1
Two-post rack mount parts
Figure 2. Four-Post Rack Mounting Parts
1
Rail-slide
3
Rack plugs (detail)
2
Rail-rod
4
Rail (assembled)
KIT-7001-4POST-L
This kit includes extended rails to support mounting some 1RU switches in thirty two to forty two inch rack depths. It is not compatible with deep chassis adapters.
Assembly Part Number
Description
Quantity
ASY-01098
Four-post brackets
2
KIT-7002
The kit supports rack depths of twenty two to thirty two inches for four-post rack mounting of 2RU switches. The kit includes two-post rack mount parts. If needed, only center mount is recommended for two-post mounting.
Assembly Part Number
Description
Quantity
ASY-00920
Two-post brackets
2
IEC-320/C13-C14, 13 A, 250 V, 2 meter
2
RJ45 Patch Panel Cable, 2 meter
1
RJ45 to DB9 Adapter Cable, 2 meter
1
ASY-01098-05
Rack ear with captive thumb screw
2
ASY-00905-0X
Front rack rail with guide block
2
ASY-00916-0X
Rear sliding rack rail with guide block
2
KIT-7101
The kit supports rack depths of twenty two to thirty two inches for four-post rack mounting of 1RU switches. It is compatible with the deep chassis adapter required to support heavier and longer switches.
Note: KIT-7101 metals are marked with a double triangle symbol to distinguish them from the equivalent KIT-7001 parts.
Assembly Part Number
Description
Quantity
IEC-320/C13-C14, 13 A, 250 V, 2 meter
2
RJ45 Patch Panel Cable, 2 meter
1
RJ45 to DB9 Adapter Cable, 2 meter
1
Identity tag
1
ASY-05581
Rack ear with captive thumb screw
2
ASY-05578
Front rack rail with guide block
2
ASY-00916
Rear sliding rack rail with guide block
2
KIT-7101-D
The kit supports rack depths of twenty two to thirty two inches for four-post rack mounting of 1RU switches. It includes the deep chassis adapter required to support heavier and longer switches.
Assembly Part Number
Description
Quantity
IEC-320/C13-C14, 13 A, 250 V, 2 meter
2
RJ45 Patch Panel Cable, 2 meter
1
RJ45 to DB9 Adapter Cable, 2 meter
1
Identity tag
1
ASY-05581
Rack ear with captive thumb screw
2
ASY-05578
Front rack rail with guide block
2
ASY-00916
Rear sliding rack rail with guide block
2
ASY-05576
Deep chassis adapter
2
Figure 3. Four-Post Rack Mounting Brackets with Roller Extensions
1
Rack rail
4
Deep chassis adapter
7
Double triangle symbol
2
Rack rail
5
Rack ear with captive thumb screw
3
Rack ear with captive thumb screw
6
Deep chassis adapter
KIT-7102
The kit supports rack depths of twenty two to thirty two inches for four-post rack mounting of 1RU switches. It supports the deep chassis adapter required to support heavier and longer switches.
Assembly Part Number
Description
Quantity
IEC-320/C19-C20, 16 A, 250 V, 2 meter
2
RJ45 Patch Panel Cable, 2 meter
1
RJ45 to DB9 Adapter Cable, 2 meter
1
Identity tag
1
ASY-05581
Rack ear with captive thumb screw
2
ASY-05578
Front rack rail with guide block
2
ASY-00916
Rear sliding rack rail with guide block
2
Deep chassis adapter
2
KIT-7102-D
The kit supports rack depths of twenty two to thirty two inches for four-post rack mounting of 1RU switches. It includes the deep chassis adapter required to support heavier and longer switches.
Assembly Part Number
Description
Quantity
IEC-320/C19-C20, 16 A, 250 V, 2 meter
2
RJ45 Patch Panel Cable, 2 meter
1
RJ45 to DB9 Adapter Cable, 2 meter
1
Identity tag
1
ASY-05581
Rack ear with captive thumb screw
2
ASY-05578
Front rack rail with guide block
2
ASY-00916
Rear sliding rack rail with guide block
2
ASY-05576
Deep chassis adapter
2
KIT-7201
The kit supports rack depths of twenty two to thirty two inches for four-post rack mounting of 2RU switches.
Assembly Part Number
Description
Quantity
IEC-320/C13-C14, 13 A, 250 V, 2 meter
2
RJ45 Patch Panel Cable, 2 meter
1
RJ45 to DB9 Adapter Cable, 2 meter
1
Identity tag
1
ASY-06132
Rack ear with captive thumb screw
2
ASY-03765
Front rack rail with guide block
2
ASY-03767
Rear sliding rack rail with guide block
2
KIT-7202
The kit supports rack depths of twenty two to thirty two inches for four-post rack mounting of 2RU switches.
Assembly Part Number
Description
Quantity
IEC-320/C19-C20, 16 A, 250 V, 2 meter
2
RJ45 Patch Panel Cable, 2 meter
1
RJ45 to DB9 Adapter Cable, 2 meter
1
Identity tag
1
ASY-06132
Rack ear with captive thumb screw
2
ASY-03765
Front rack rail with guide block
2
ASY-03767
Rear sliding rack rail with guide block
2
Cables
Lists the cables required for installation of the switches.
Note: Use only the power cables shipped with your switch.
Quantity
Description
2
Power cables: IEC-320/C13-C14, 13 A, 250 V, 2 m
2
Power cables: IEC-320/C19-C20, 16 A, 250 V, 2 m
1
RJ-45 Patch Panel Cable
1
RJ-45 to DB9 Adapter Cable
Warning: All provided power cables are for use only with Arista products.
Ground Extender Kit (Optional)
Lists the cables required for installation of the device.
