- Written by Quentin L'Hours
- Posted on December 23, 2019
- Updated on December 23, 2019
- 9450 Views
In the multi agent routing protocol model, the Bgp agent now supports matching community lists with a logical OR via
- Written by Sandeep Betha
- Posted on January 22, 2021
- Updated on March 7, 2025
- 12737 Views
This feature adds support for user-configured BGP Nexthop Resolution RIB profiles for various BGP-based services e.g. IP unicast, L3 VPN, EVPN, etc. The feature allows an administrator to customize the next hop resolution semantics of BGP routes with an ordered list, or profile, of resolution RIB domains (i.e., either tunnel or IP domain). This allows EOS to direct specific services over the specified RIB domains, overriding the default behavior.
- Written by Charles Gibert
- Posted on June 13, 2019
- Updated on June 13, 2019
- 8227 Views
The “set as path prepend” clause in route map configuration mode has been enhanced with the addition of
- Written by Paraic Gallagher
- Posted on October 28, 2020
- Updated on October 28, 2020
- 7879 Views
This feature adds a configuration option which provides a CLI error if a reference is made to an unconfigured policy
- Written by Arpit Bansal
- Posted on August 18, 2020
- Updated on August 18, 2020
- 8118 Views
Level 1 2 routers set attached bit in their Level 1 LSPs to indicate their reachability to the rest of the network. A
- Written by Sharad Birmiwal
- Posted on February 3, 2022
- Updated on February 3, 2022
- 9982 Views
The "set metric" clause in a route map sequence has been enhanced with the addition of the "igp nexthop cost" keyword.
- Written by Deeksha Srivastava
- Posted on March 12, 2020
- Updated on March 16, 2020
- 7941 Views
This feature adds support for ‘match interface’ clause under route map config for Bgp policy application in
- Written by Robert Van Dijk
- Posted on August 20, 2020
- Updated on September 4, 2020
- 7775 Views
This feature adds support for ‘match ip(v6) resolved next hop’ clause under route map config for BGP policy
- Written by David Cronin
- Posted on August 26, 2019
- Updated on October 25, 2021
- 10205 Views
This document describes a new CLI command to help debug how and why route maps permit and deny paths. The aim of this CLI
- Written by Nikhil Satish Pai
- Posted on December 7, 2020
- Updated on December 9, 2020
- 7967 Views
This feature adds support for the match ospf instance <instanceID> clause under the route map config.
- Written by James Doherty
- Posted on October 28, 2020
- Updated on October 28, 2020
- 7321 Views
4.25.0F adds support to use large community lists in the ‘set large community’ route map set clause.