Parts List
Each switch provides an accessory kit that contains parts that are required to install the switch. This appendix lists the installation parts contained in the switch accessory kit.
Two-Post Rack Mount Parts
 
Table B-1  Two-Post Rack Mount Parts
Quantity
Description
2
Center-mount brackets.
20
M4x8 panhead Phillips screws.
Figure B-1: Two-Post Rack Mount Parts
 
 
Four-Post Rack Mount Parts
 
Table B-2  Four-Post Rack Mount Parts
Quantity
Description
2
Front brackets.
4
Shelf supports.
2
Back brackets.
1
Left shelf.
1
Right shelf.
10
M6X16 panhead Phillips screws.
4
M6 Cage Hex Nuts.
2
M6 Cage Nut Square Hole Racks.
Figure B-2: Four-Post Rack Mount Parts
Parts Used in All Rack Mount Configurations
Cables
 
Table B-3  Cables Provided in Accessory Kit
Quantity
Description
4
power cables: 14 AWG, C19-C20, 2 meters.
2
RJ-45 Patch Panel Cables, 2 meters.
2
RJ-45 to DB9 Adapter Cable, 2 meters.
Warning All provided power cables are for use only with Arista products.
Equipment
 
Table B-4  Installation Equipment Provided in Accessory Kit
Quantity
Description
1
Adjustable Wrench.
Rack Mount Alternate Parts
These parts are supplied for threaded racks that do not use M6 screws.
 
Table B-5  Threaded Rack Post Parts
Quantity
Description
5
M5 hex nuts.
11
M5X16 panhead Phillips screws.
5
12-24 hex nuts.
11
12-24X5/8 panhead Phillips screws.
5
10-32 hex nuts.
11
10-32X5/8 panhead Phillips screws.
3
M6 cage nuts.