Status LED Indicators
Icon | Description | Condition | Corrective Action |
![]() |
Drive Indicator | The indicator turns solid amber if there is a drive error. |
|
![]() |
Temperature Indicator | The indicator turns solid amber if the system experiences a thermal error (for example, the ambient temperature is out of range, or there is a fan failure). | Ensure that none of the following conditions exist:
|
![]() |
Electrical Indicator | The indicator turns solid amber if the system experiences an electrical error (for example, voltage out of range, or a failed power supply unit (PSU) or voltage regulator). | Check the System Event Log or system messages for the specific issue. If it is due to a problem with the PSU, check the LED on the PSU. Reseat the PSU. |
![]() |
Memory Indicator | The indicator turns solid amber if a memory error occurs. | Check the System Event Log or system messages for the location of the failed memory. Reseat the memory module. |
![]() |
PCIe Indicator | The indicator turns solid amber if a PCIe card experiences an error. | Restart the system. Update any required drivers for the PCIe card. Reinstall the card. |
iDRAC Direct LED Indicator Codes
The iDRAC Direct LED indicator lights up to indicate that the port is connected and is being used as a part of the iDRAC subsystem.
You can configure iDRAC Direct by using a USB to micro USB (type AB) cable, which you can connect to your laptop or tablet. The following table describes iDRAC Direct activity when the iDRAC Direct port is active:
iDRAC Direct LED Indicator Code | Condition |
Solid green for two seconds. | Indicates that the laptop or tablet is connected. |
Flashing green (on for two seconds and off for two seconds). | Indicates that the laptop or tablet connected is recognized. |
Turns off. | Indicates that the laptop or tablet is unplugged. |
iDRAC Quick Sync 2 Indicator Codes
iDRAC Quick Sync 2 module (optional) is located on the left control panel of your system.
![](/assets/images/qsg/qsg-cva-200cv-250cv/Graphics/Appendix%20A%20Status%20Indicators/indicator_Sync2.png)
iDRAC Quick Sync 2 indicator code | Condition | Corrective action |
---|---|---|
Off (default state) | Indicates that the iDRAC Quick Sync 2 feature is turned off. Press the iDRAC Quick Sync 2 button to turn on the iDRAC Quick Sync 2 feature. | If the LED fails to turn on, reseat the left control panel flex cable and check. |
Solid white | Indicates that iDRAC Quick Sync 2 is ready to communicate. Press the iDRAC Quick Sync 2 button to turn off. | If the LED fails to turn off, restart the system. |
Blinks white rapidly | Indicates data transfer activity. | |
Blinks white slowly | Indicates that firmware update is in progress. | |
Blinks white five times rapidly and then turns off | Indicates that the iDRAC Quick Sync 2 feature is disabled. | Check if iDRAC Quick Sync 2 feature is configured to be disabled by iDRAC. |
Solid amber | Indicates that the system is in fail-safe mode. | Restart the system. |
Blinking amber | Indicates that the iDRAC Quick Sync 2 hardware is not responding properly. | Restart the system. |