Mounting the Appliance

The appliance is designed to be installed in a rack. The following topics are covered in this chapter:

Attaching Mounting Brackets to the Chassis

This procedure describes attaching mounting brackets to the appliance chassis.

 

  1. Place the mounting bracket flush against one side and to the front of the chassis so that the holes in the bracket and the chassis are in line for the attachment screws.
  2. Use three screws to attach the bracket to the chassis.
  3. Attach the second bracket to the other side of the chassis.
    Note: The bracket will extend away from the chassis and provide three larger holes to attach to the rack as shown below.
    1 Mounting screws 3 Mounting screws
    2 Left mounting bracket 4 Right mounting bracket

Inserting the Appliance into the Rack

This procedure attaches the appliance to the rack.

Note: Use the appropriate screws for the rack posts being used.
  1. Lift the chassis into the rack. Position the brackets against the rack posts at the same level.
    1, 2 Mounting screws (not included)

     

  2. Select mounting screws that fit your equipment rack.
  3. Attach the brackets to the rack posts.