Rear Panel
All switches covered by this guide use one of the rear panels shown below. Depending on the installed power supply module, the appearance could be different from those shown.
Note: All devices are designed to fit into a 19” rack. The appearance may be different than those shown based on the PSU and the fan modules used.
Note: Handle or label color indicates airflow direction.
1 | Power supply module 1 | 5 | Fan module 4 | 9 | Fan module 3 status LED |
2 | Fan module 1 | 6 | Power supply module 2 | 10 | Fan module 2 status LED |
3 | Fan module 2 | 7 | PSU module 2 status LED | 11 | Fan module 1 status LED |
4 | Fan module 3 | 8 | Fan module 4 status LED | 12 | PSU module 1 status LED |
1 | Power supply module 1 | 6 | Fan module 3 | 11 | Fan module 3 status LE |
2 | System status LED | 7 | Fan module 4 | 12 | Fan module 2 status LED |
3 | Ethernet management port | 8 | Power supply module 2 | 13 | Fan module 1 status LED |
4 | Fan module 1 | 9 | Earth grounding pad | 14 | Console serial port |
5 | Fan module 2 | 10 | Fan module 4 status LED | 15 | USB port |
1 | Power supply 1 status LED | 4 | Fan module 2 handle | 7 | Fan module 2 status LED |
2 | Fan module 1 handle | 5 | Power supply 2 status LED | 8 | Fan module 1 status LED |
3 | Fan module bezel1 | 6 | Power supply 2 | 9 | Power supply 1 |
1. Bezel and handle color indicate airflow direction.
1 | Power supply module 1 | 5 | Fan module 1 status LED | 9 | Fan module 3 status LED |
2 | Power supply module 1 status LED | 6 | Fan module 2 release | 10 | Power supply module 2 |
3 | Management ports | 7 | Fan module 2 status LED | 11 | Power supply module 2 status LED |
4 | Fan module 1 release | 8 | Fan module 3 release | 12 | Fan module bezel1 |
1. Bezel and handle color indicate airflow direction.