TOI Author :: Anoop Dawani

Bidirectional Protocol Independent Multicast (PIM) allows routers to build trees to deliver multicast traffic

Static multicast feature brings in capability to statically configure multicast routes on any Arista platform

Policy Based Routing (PBR) provides the flexibility of routing according to custom defined policies in a way that

With this feature, IPv4 and IPv6 packets matching a static nexthop-group route can be encapsulated within an IP-in-IP tunnel and forwarded

Secondary private VLAN trunk ports are introduced in the EOS 4.15.2F release. This feature can

This article describes changes to the platform command 'show platform fm6000 agileports'. Earlier this command was

This article describes the addition of a show command to display the mapping between tap and tool ports on a per

Hardware Table Capacity Monitoring is a new feature to keep track of the capacity and utilization of various hardware forwarding resources and generate alerts/syslogs when the utilization exceeds a threshold value. Users can keep track of the current usage statistics using a single show command, and also configure thresholds on a per-resource basis, to be notified about any high-utilization upfront, before reaching any resource limits. The Main use-case would be for troubleshooting in overflow situations and avoid overflows altogether by taking corrective actions on high utilization.

Some data plane features on some switch platforms may require packets to be recirculated through the switch chip in

The 7250X and 7300 series use an optimized internal CLOS design with multiple port ASICs interconnected via Fabric

VXLAN multicast decapsulation enables VTEPs that only support HER (Head End Replication) to terminate multicast

This feature detects whether a given EOS image is MLAG ISSU compatible with the currently running version on a switch.

This feature allows routing traffic across two Vrf domains on the same switch using an external loopback cable

This feature enables configuring static IPv4 routes that specify the next hop by using an IPv6 address instead of an

VxLAN bridging enables stretching Layer 2 domains across a Layer 3 cloud. VxLAN routing provides the capability to

This feature enables exchanging IPv4 NLRI using MP BGP over an IPv6 TCP connection.  Additionally, this feature

Bidirectional Forwarding Detection(BFD) is a low overhead protocol designed to provide rapid detection of

This feature adds authentication support for OSPFv3. Unlike OSPFv2, OSPFv3 does not have authentication fields