- Written by Michael (Mike) Fink
- Posted on 12月 22, 2017
- Updated on 12月 2, 2024
- 14405 Views
Filtered Mirroring allows certain packets to be selected for mirroring, rather than all packets ingressing or egressing a particular port.
- Written by Vikas Hegde
- Posted on 11月 22, 2017
- Updated on 12月 20, 2024
- 17744 Views
Connectivity Monitor is an EOS feature that allows users to monitor their network resources from their Arista switches. The resources being monitored may or may not be Arista devices. Connectivity monitoring is unidirectional in nature.
- Written by Lavanya Conjeevaram
- Posted on 12月 22, 2017
- Updated on 8月 16, 2024
- 9412 Views
In the traditional data center design, inter-subnet forwarding is provided by a centralized router, where traffic traverses across the network to a centralized routing node and back again to its final destination. In a large multi-tenant data center environment this operational model can lead to inefficient use of bandwidth and sub-optimal forwarding.
- Written by Anoop Dawani
- Posted on 9月 30, 2015
- Updated on 11月 26, 2024
- 7533 Views
Hardware Table Capacity Monitoring is a new feature to keep track of the capacity and utilization of various hardware forwarding resources and generate alerts/syslogs when the utilization exceeds a threshold value. Users can keep track of the current usage statistics using a single show command, and also configure thresholds on a per-resource basis, to be notified about any high-utilization upfront, before reaching any resource limits. The Main use-case would be for troubleshooting in overflow situations and avoid overflows altogether by taking corrective actions on high utilization.
- Written by Marc Laprade
- Posted on 11月 3, 2021
- Updated on 6月 13, 2023
- 10479 Views
This feature will allow the user to select whether port mirror destinations of type GRE tunnel include the optional “key” field in the GRE header on certain platforms. The key field allows the user to uniquely identify a particular packet flow. The feature also allows the user to specify the value of the 32 bit key field.
- Written by Nathan Wolfe
- Posted on 2月 15, 2018
- Updated on 11月 7, 2024
- 12262 Views
Introduced in EOS-4.20.1F, “selectable hashing fields” feature controls whether a certain header’s field is used in the hash calculation for LAG and ECMP.
- Written by Santosh Kumar
- Posted on 12月 22, 2017
- Updated on 5月 2, 2024
- 7381 Views
PIM Static Source Discovery (SSD) is a feature implemented as part of PIM-SM. Familiarity with setting up and configuring PIM-SM (Sparse Mode) and PIM-SSM (Source-Specific Multicast) is assumed.
- Written by Travis Hammond
- Posted on 2月 15, 2018
- Updated on 2月 15, 2018
- 6920 Views
This article describes a new TAP Aggregation TCAM profile and a corresponding enhancement to the TAP Aggregation