Wall Mount the O-105

Mounting the access point (AP) on the wall consists of the following steps:

1. Affix the expansion bolts on the wall such that the holes on the mounting base can be perfectly placed over them.

   

   Table 1. Labels: Dimensions

   Label	Description
   1	Horizontal distance between holes: 50mm
   2	Vertical distance between holes: 84mm
   3	Diameter of the hole: 6.5mm, depth 30mm

2. Attach the mounting base to the bottom cover of the O-105 device.

   

   Table 2. Labels: Parts

   Label	Description
   1	Philips #2 screwdriver. Length >= 100mm

3. Mount the device on the expansion bolts.