Overview
This guide is intended for network professionals who need to install the Arista 7200 Series Enterprise WAN routers.
Scope
This section lists the devices this guide covers.
- Arista AWE-7230R-4TX-4S Enterprise WAN router
- Arista AWE-7250R-16S Enterprise WAN router
Only qualified or trained personnel should install, service, or replace this equipment.
Seul le personnel qualifié doit installer, service, ou remplacer cet équipement.
Receiving and Inspecting the Equipment
Upon receiving the router, inspect the packaging and record if there is any external damage. Retain the packing material if you suspectany part of the shipment is damaged; the carrier might need the packing material to inspect.
If the packaging is not damaged during transit, unpack each box carefully. Ensure all accessories are packed in the same box as the router.
Review the packing list that comes with the router to assure you received all the items listed. Refer to the Parts List to verify that all components are present.
Installation Process
- Select and prepare the installation site. (Site Selection).
- Assemble the installation tools listed. (Tools and Parts Required for Installation).
- Attach the mounting brackets and install the router in an equipment rack. (Rack Mounting the Router).
- Connect the router to the power source, console cables, and management network. (Cable the Router).
- Configure the router. (Configuring the Router).
Safety Information
Refer to the Arista Networks document. Safety Information and Translated Safety Warnings are at https://www.arista.com/en/support/product-documentation.
Class 1 laser product: This product has provisions for installing Class 1 laser transceivers that provide optical coupling to the communication network. After installing a Class 1 laser product, the equipment is now a Class 1 laser product. The customer is responsible for selecting and installing the Class 1 laser transceiver and for ensuring that the Class 1 AEL (allowable emission limit) per EN/IEC 60825, CSA E60825-1, and Code of Federal Regulations 21 CFR 1040 is not exceeded after the laser transceiver has been installed. Do not install laser products whose class rating is greater than 1. Refer to all safety instructions that accompany the transceiver before installation. Only Class 1 laser devices certified for use in the country of installation by the cognizant agencies are to be utilized in this product. The ultimate disposal of this product should be by all applicable laws and regulations.
Produit laser de classe 1: Ce produit a des dispositions pour installer des émetteurs-récepteurs de laser de classe 1 qui offre de couplage au réseau de communication optique. Une fois un produit laser de classe 1 est installé, l'équipement est un produit laser de classe 1 (Appareil à laser de Classe 1). Le client est responsable pour sélectionner et installer l'émetteur/récepteur de laser de classe 1 et pour assurer que la classe 1 AEL (limite d'émission admissible) par EN/IEC 6-825, CSA E60825-1, et Code des règlements fédéraux 21 CFR 1040 ne soit pas dépassée après avoir installé l'émetteur/récepteur de laser. Ne pas installer des appareils à laser dont la cote de classe est supérieure à 1.Voir toutes les consignes de sécurité qui ont accompagné l'émetteur-récepteur avant l'installation. Seuls appareils laser de classe 1 certifiés pour une utilisation dans le pays d’installation par l’organisme compétent doivent être utilisées dans ce produit.
DO NOT open the router case. There are NO user-serviceable parts inside. Entrust any repair to a qualified technician.
N’ouvrez PAS le boîtier du routeur. Il n’y a AUCUNE pièce réparable par l’utilisateur à l’intérieur. Confiez toute réparation à un technicien qualifié.
Obtaining Technical Assistance
Any customer, partner, reseller, or distributor holding a valid Arista Service Contract can obtain technical support in any of the following ways:
-
Email: 이 이메일 주소가 스팸봇으로부터 보호됩니다. 확인하려면 자바스크립트 활성화가 필요합니다.
Include a detailed problem description and the “show tech-support” output.
-
Web: https://www.arista.com/en/support
The support portal on our website allows you to create support cases. You can also download the most current software and documentation and view FAQs, Knowledge Base articles, Security Advisories, and Field Notices.
-
Phone: +1 866-476-0000 or +1 408-547-5502
Specifications
This section lists the specifications of the Arista 7200 Series Enterprise WAN Routers.
Router | Size (W x H x D) | Weight |
---|---|---|
AWE-7230R-4TX-4S-F | 17.32 x 1.71 x 16.92 inches
(440 x 43.5 x 430 mm) |
20.5 lbs
(9.3 kg) |
AWE-7250R-16S-F | 17.32 x 3.46 x 20.47 inches
(440 x 88 x 520 mm) |
29.98 lbs
(13.6 kg) |
Router | Operating Temperature | Storage Temperature | Operating Altitude | Relative Humidity |
---|---|---|---|---|
AWE-7230R-4TX-4S-F | 32° to 104°F
(0° to 40°C) |
-13° to 158°F
(-25° to 70°C) |
0 to 10,000 feet
(0 to 3048 meters) |
5 to 95%
(non-condensing) |
AWE-7250R-16S-F | 32° to 104°F
(0° to 40°C) |
-13° to 158°F
(-25° to 70°C) |
0 to 10,000 feet
(0 to 3048 meters) |
5 to 95%
(non-condensing) |
Router | Power Source | Input Power Rating |
---|---|---|
AWE-7230R-4TX-4S-F | AC Power | 100-240VAC, 8-4A, 50/60 Hz |
AWE-7250R-16S-F | AC Power | 100-240VAC, 10-5A, 50/60 Hz |
Router | Power Draw (Typical/Maximum) | Supported Power Supply |
---|---|---|
AWE-7230R-4TX-4S-F | 100W/500W | PWR-561-AC-RED |
AWE-7250R-16S-F | 200W/750W | PWR-861-AC-RED |
Router | Airflow | Power Supply | Fan | Fan Type |
---|---|---|---|---|
AWE-7230R-4TX-4S-F | Front to rear | 2 | 4+1 | Fixed/built-in |
AWE-7250R-16S-F | Front to rear | 2 | 3+1 | FAN-7202-RED |