Rack Mounting an Awake Security Appliance

 

This chapter describes the rack mounting procedure identical to all Awake Security appliances covered by this guide. Illustrations in this chapter depict the mounting of Awake 1RU and 2RU appliances.

 

Ce chapitre décrit la procédure de montage en rack qui est identique pour toutes les appliances Awake Security couvertes par ce guide. Les illustrations de ce chapitre décrivent le montage des appliances Awake 1RU et 2RU.

 

The following sections provide instructions for mounting Awake 1RU and 2RU appliances:

Installing 1RU Awake Security appliances

Perform the following steps to install a 1RU Awake Security appliance:
  1. Identify the left and right outer rails by examining the ends, which bend outward. Slide the matching inner rails into the corresponding outer rails to be sure they are ready for installation.
     
    Note: The rail set fits a 25.6" and 33" deep rack.

     

  2. Position the alignment pins in the rear rail (2) with the hole at the end of the slot in the front rail (1), and slide the front section into the rear section (3).
    Figure 1. Installing Rails

     

    Note: Each end of the assembled outer rail includes a bracket with alignment pins to fit into your rack holes.

     

  3. Position the alignment pins on the front end of the rail with the holes on the front of the rack (C). Push the rail into the rack until the quick-release bracket snaps into place, securing the rail to the rack.
     
    Note: Mount the rails horizontally, referencing the number labels on the rack's vertical bars.

     

  4. Adjust the rail to reach just past the full depth of your rack.
  5. Position the alignment pins on the rear end of the rail to the holes on the rack (D) and push the rail into the rack until the quick-release bracket snaps into place, securing the rail to the rack.
  6. Repeat the procedure for the other outer rail assembly.
    Figure 2. Rack Rails Installed

     

    Note: Ensure that the appliance includes the inner rails and inner rail extensions and that the outer rails are installed on the rack.

     

  7. Align the appliance's inner rails with the front of the outer rails on the rack.
  8. Slide the appliance rails into the rack, keeping the pressure even on both sides.
    Figure 3. Installing the Appliance into a Rack

     

    Note: You may have to select the bracket clips while inserting the appliance. When you fasten the server into the rack, ensure you hear the bracket clip protect with an audible click.

     

  9. Secure the front of the server to the rack with thumbscrews.

Installing 2RU Awake Security appliances

 

Perform the following steps to install a 2RU Awake Security appliance:
  1. Detach the inner rails from the outer rails.
    Figure 4. Detaching Rails

     

  2. Install the inner rails to the side of the appliance.
    Figure 5. Install inner rails

     

     

  3. Press the button to slide the rail in.
    Figure 6. Slide the Rail in

     

    Note: Ensure the rails are attached to the same rack position number in all four corners.

     

  4. Slide the outer rail into the front rack.
    Figure 7. Assembling Outer Rails

     

  5. Secure the rack to the rail with screws.
    Figure 8. Screw in the rails

     

  6. Repeat the previous step to mount four corners.
    Figure 9. Mount all four corners

     

  7. Insert the appliance rails into the rack rails and slide the appliance in.
    Figure 10. Positioning the appliance

     

  8. Install screws into the handles to secure the appliance.
    Figure 11. Securing the Appliance