Note: CVP highlights the managed lines in yellow and unmanaged lines in grey. In the example
below, the bold text represents managed lines and the italic text represents unmanaged
lines.
Config 1
router multicast
ipv4
routing
route 232.1.1.1 192.168.0.1 iif Ethernet6 oif Ethernet20
!
vrf test
ipv4
routing
route 238.1.1.1 2.2.2.2 iif Ethernet4 oif Ethernet41
route 239.1.1.1 2.2.2.2 iif Ethernet4 oif Ethernet41
route 239.3.3.3 3.3.3.3 iif Ethernet4 oif Ethernet5
route 239.4.4.4 1.1.1.1 iif Ethernet42 oif Ethernet45
| Filters |
Result |
router multicast
$
router multicast
vrf test
ipv4
route 239*
|
router multicast
ipv4
routing
route 232.1.1.1 192.168.0.1 iif Ethernet6 oif Ethernet20
!
vrf test
ipv4
routing
route 238.1.1.1 2.2.2.2 iif Ethernet4 oif Ethernet41
route 239.1.1.1 2.2.2.2 iif Ethernet4 oif Ethernet41
route 239.3.3.3 3.3.3.3 iif Ethernet4 oif Ethernet5
route 239.4.4.4 1.1.1.1 iif Ethernet42 oif Ethernet45
|
router multicast
ipv4
route*
vrf test
ipv4
route 238*
router multicast
vrf test
ipv4
route 239*
|
router multicast
ipv4
routing
route 232.1.1.1 192.168.0.1 iif Ethernet6 oif Ethernet20
!
vrf test
ipv4
routing
route 238.1.1.1 2.2.2.2 iif Ethernet4 oif Ethernet41
route 239.1.1.1 2.2.2.2 iif Ethernet4 oif Ethernet41
route 239.3.3.3 3.3.3.3 iif Ethernet4 oif Ethernet5
route 239.4.4.4 1.1.1.1 iif Ethernet42 oif Ethernet45
|
Config 2
transceiver qsfp default-mode 4x10G
load-balance policies
load-balance sand profile Orange
no fields mac
load-balance sand profile Blue
no fields mac
| Filters |
Result |
transceiver *
load-balance policies
load-balance sand profile *
no fields mac
|
transceiver qsfp default-mode 4x10G
load-balance policies
load-balance sand profile Orange
no fields mac
load-balance sand profile Blue
no fields mac
|
transceiver *
load-balance policies
load-balance sand profile Orange
no fields mac
|
transceiver qsfp default-mode 4x10G
load-balance policies
load-balance sand profile Orange
no fields mac
load-balance sand profile Blue
no fields mac
|
